Yonkers, NY · Westchester County · Since 1994
Sump Pump Installation in Yonkers, NY.
Primary pumps fail in the storms they were designed to handle. We install primary plus battery backup as standard — not as a $400 upsell. CT/NY frost-depth-compliant discharge lines included. Especially critical for Hudson-adjacent homes in Ludlow and Crestwood lower where high water tables and frequent storm-season power loss overwhelm single-pump installs.
Free pump system audit. Written estimate within 24 hours. Same-day installs available for storm-season emergencies.
- Battery backup standard
- Lifetime pump warranty
- Same-day installs available
Three reasons to upgrade now, not after the flood
If any of these match your situation, replace before the failure event.
Sump pumps don’t fail gracefully — they fail mid-storm. The good news: failure is predictable. These are the three signs that mean it’s time.
Existing pump is older than 8 years
Sump pump average lifespan is 7 to 10 years. They don’t gracefully retire — they fail in the storm they were supposed to handle. If yours is older than 8, replace before the failure event, not after the flooded basement and the insurance claim and the lost belongings.
SCHEDULE A FREE ESTIMATEPower outage caused a basement flood
The storm took out your power. Your pump (which runs on power) stopped. Your basement filled. This is the #1 cause of basement floods in CT and NY — and it’s exactly what a battery backup pump prevents, for around $800 installed alongside a primary. Especially common in Park Hill and Ludlow homes near the Hudson where water tables run high year-round and storm outages compound the load.
SCHEDULE A FREE ESTIMATEPump runs constantly or sounds different
A new motor noise. Cycling without rain. Running longer than usual to clear the same volume. These are pre-failure signs. Catch them now and replace on a Tuesday afternoon. Ignore them and replace on a flooded Sunday at 3am.
SCHEDULE A FREE ESTIMATEWhy CT and NY homeowners pick Big Easy for sump systems.
Why the industry default fails you
Two pumps. Not one.
The industry default is one pump. We install two — a primary cast-iron sump pump plus a battery-backed secondary — as standard. Why? Because the storms that cause the most water are the same storms that knock out residential power.
A single-pump install at half the price is half the protection — gone exactly when you need it most. We won’t sell you that. Battery backup isn’t a luxury upsell; it’s the actual minimum for CT and NY storm patterns. Here is exactly how we install it.
Free pump system audit
We test your existing pump under load. Inspect the basin, check the discharge, measure your home’s water volume. You get a written assessment of whether the system needs full replacement, just a backup added, or honestly nothing right now.
Excavate basin location if new basin needed
If you’re starting from scratch, we excavate at the lowest interior corner — typically a 4-hour task with proper dust control. If you have a working basin, we keep it and upgrade what’s inside.
Install primary cast-iron pump + battery backup
Cast-iron primary pumps last longer than plastic ones in CT’s water-table conditions. Battery backup uses a deep-cycle marine battery, sealed in a vented box, with 12–24 hours of pumping runtime depending on flow.
Run discharge line below CT/NY frost depth
Discharge plumbing routes outside, buried below the 48-inch New York frost line (NY code). It never freezes shut. Daylight outlet positioned away from foundation so discharged water can’t cycle back.
When you don’t actually need a new pump
Sometimes the pump you have is fine. Older pumps that test under load, that you have a maintenance record on, that match your basement’s actual water volume — we’ll tell you to keep them. We make zero on selling you a pump you don’t need. We make a long-term customer by telling you to wait two more years and call us back.
Real sump pump installs in CT and NY.
Illustrative example · representative of typical sump pump installation work · not a specific Big Easy customer project[Problem solved — e.g. “Battery-backed pump kicked on during October power outage, basement stayed bone-dry through the storm”]
Illustrative example · representative of typical sump pump installation work · not a specific Big Easy customer project
Illustrative example · representative of typical sump pump installation work · not a specific Big Easy customer project[Problem solved — e.g. “Frozen discharge line fixed before winter, ice-damming flood prevented”]
Illustrative example · representative of typical sump pump installation work · not a specific Big Easy customer project
Free pump system audit. Written estimate within 24 hours.
Sixty minutes on site. We test your existing pump under load, inspect the basin, evaluate the discharge. Then we tell you honestly what needs to happen — including ‘nothing right now’ if that’s the truth.
- Live test of existing pump under simulated load
- Basin and discharge inspection
- Water-volume assessment matched to pump capacity
- Written estimate emailed within 24 hours
- Honest ‘wait two more years’ if your existing system is healthy
More from Big Easy
Need a different basement service?
Basement Waterproofing
Interior drainage, vapor barriers, dry basements.
Foundation Repair
Cracks, bowing walls, settlement.
Crawl Space Repair
Encapsulation, dehumidification, structural supports.
Mold Remediation
Inspection, containment, removal, prevention.
Basement Finishing
Waterproofed first, then framed and finished.